Sunday, February 14, 2010

How Do You Put A Floor In A Boat How Hard Is It To Put A New Floor In A Regular Bass Boat?

How hard is it to put a new floor in a regular bass boat? - how do you put a floor in a boat

Plywood Glue ... ... ... Screw fiberglass mat and resin .. some tools .... should be easy to

3 comments:

galgiere said...

Nix first saw the opportunity to remove the interior and exterior mirrors, with one piece fiberglass skin on the floor on a 1 / 2 will be replaced on the side all the way around the word, not depth, the thickness of the glass (about 1 / 8 inch) SCREWDRIVER now with a sheet of fiberglass shell of the old wood, you remove (the old layers of the soil should be easy) if you are any holes or notches first to throw a cardboard template, nothing, until you are completed, the rest is just a bunch of measuring and cutting
Sounds easy on paper.
Good luck and have fun.

br549 said...

To move, unlike a boat "regular bass?

Some require some plywood fiberglassing use of carpeting. It's easy to glaze a bit more complicated, but still "no power".

Tool is not very difficult, but you do not need a job and simply good. I come to the floor 17 'Tri-Hull in a few days.

Go to Google and type this to get fiberglass boat floor replacement, good site to many.

See also these guys; http://www.fiberglasssite.com/servlet/St ...

Here I have all my supplies glass. With cheap polyester resin, and I, Chapter 2 ounces chopped mats. It was an interesting project and worth the effort.

Moreover, instead of marine plywood or outside,I pressure-treated layers. In the old site, click down on Fiberglassing son. Good information there.

Richard C said...

This is no easy task. If you're a carpenter, well, complete with a workshop and what you do "Cost vs. thinking. Benefits. It is quite possible that you could buy a similar boat with his plate, much less than the place of their current boat.

Post a Comment